| ■商品名 【Juniper】 ジュニパー SRX300 サービスゲートウェイ 初期化済
■附属品 アダプタのみ
■商品詳細 動作確認の範囲:知識不足、環境不足のため以下の範囲となります。
1:入電確認 2:内部データ初期化 3:下記コンソール出力ログにて程度の判断お願いします。
※ポートのチェックはしておりません。 ※通信の確認はしておりません。 ※動作の保証は通電と初期化の2点となります。その他につきましては保証範囲外とさせていただきます。 ご了承の上、入札にご参加下さい。
root> show version Model: srx300 Junos: 15.1X49-D50.3 JUNOS Software Release [15.1X49-D50.3]
root> show system alarms No alarms currently active
root> show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis CV3316AF1383 SRX300 Routing Engine REV 0x08 650-065039 CV3316AF1383 RE-SRX300 FPC 0 FPC PIC 0 6xGE,2xGE SFP Base PIC Power Supply 0
root> show system autorecovery state Configuration: File Recovery Information Integrity Check Action / Status rescue.conf.gz Saved Passed None BSD Labels: Slice Recovery Information Integrity Check Action / Status s1 Saved Passed None s2 Saved Passed None s3 Saved Passed None s4 Saved Passed None
root> show chassis environment Class Item Status Measurement Temp Routing Engine OK 37 degrees C / 98 degrees F Routing Engine CPU OK 51 degrees C / 123 degrees F Power Power Supply 0 OK
root> show system boot-messages kld_map_v: 0x8ff80000, kld_map_p: 0x0 Running in PARTITIONED TLB MODE Copyright (c) 1996-2016, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 15.1X49-D50.3 #0: 2016-05-28 20:02:37 UTC builder@ralenth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D50.3/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel can't re-use a leaf (debug)! JUNOS 15.1X49-D50.3 #0: 2016-05-28 20:02:37 UTC builder@ralenth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D50.3/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel real memory = 4294967296 (4194304K bytes) avail memory = 2621882368 (2500MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) Security policy loaded: Junos MAC/veriexec (mac_veriexec) Security policy loaded: JUNOS MAC/pcap (mac_pcap) MAC/veriexec fingerprint module loaded: SHA256 MAC/veriexec fingerprint module loaded: SHA1 netisr_init: !debug_mpsafenet, forcing maxthreads from 2 to 1 cpu0 on motherboard : CAVIUM's OCTEON 70XX/71XX CPU Rev. 0.2 with no FPU implemented L1 Cache: I size 78kb(128 line), D size 32kb(128 line), thirty two way. L2 Cache: Size 512kb, 4 way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 set clock 0x58 xhci0: on obio0 usb0: on xhci0 usb0: USB revision 3.0 uhub0: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered xhci1: on obio0 usb1: on xhci1 usb1: USB revision 3.0 uhub1: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered cpld0 on obio0 pcib0: on obio0 Disabling Octeon big bar support pcib0: Initialized controller pci0: on pcib0 pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 cfi1: on obio0 umass0: ATP Electronics ATP CG eUSB, rev 2.00/11.00, addr 2 Timecounter "mips" frequency 1200000000 Hz quality 0 Registered AMT tunnel Encap with UDP Tunnel! Loading Redundant LT driver ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup Kernel thread "wkupdaemon" (pid 47) exited prematurely. da0 at umass-sim0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: 40.000MB/s transfers da0: 7672MB (15712256 512 byte sectors: 255H 63S/T 978C) Trying to mount root from ufs:/dev/da0s1a WARNING: / was not properly dismounted WARNING: / was not properly dismounted WARNING: R/W mount of /cf/var denied. Filesystem is not clean - run fsck |